Modul:Category handler: Forskjell mellom sideversjoner

Fra Wikisida.no
Hopp til navigering Hopp til søk
m (Ændrede beskyttelsesindstillinger for "Modul:Category handler": Robot: Beskytter en liste af filer. ([Redigér=Tillad kun etablerede brugere og administratorer] (på ubestemt tid) [Flyt=Tillad kun etablerede brugere og administratorer] (på ubestemt tid)))
m (27 sideversjoner ble importert)
Linje 1: Linje 1:
--------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------
-- --
-- --
-- CATEGORY HANDLER --
-- CATEGORY HANDLER --
-- --
-- --
-- This module implements the {{category handler}} template in Lua, --
-- This module implements the {{category handler}} template in Lua, with a few improvements: all --
-- with a few improvements: all namespaces and all namespace aliases --
-- namespaces and all namespace aliases are supported, and namespace names are detected --
-- automatically for the local wiki. This module requires [[Module:Namespace detect]] and --
-- are supported, and namespace names are detected automatically for --
-- the local wiki. This module requires [[Module:Namespace detect]] --
-- [[Module:Yesno]] to be available on the local wiki. It can be configured for different wikis --
-- and [[Module:Yesno]] to be available on the local wiki. It can be --
-- by altering the values in the "cfg" table. --
-- configured for different wikis by altering the values in --
-- --
----------------------------------------------------------------------------------------------------------
-- [[Module:Category handler/config]], and pages can be blacklisted --
-- from categorisation by using [[Module:Category handler/blacklist]]. --
----------------------------------------------------------------------------------------------------------
-- --
-- Configuration data --
--------------------------------------------------------------------------------
-- Language-specific parameter names and values can be set here. --

----------------------------------------------------------------------------------------------------------
-- Load required modules
local cfg = {}
-- The following config values set the names of parameters that suppress categorisation. They are used
-- with Module:Yesno, and work as follows:
--
-- cfg.nocat:
-- Result of yesno(args[cfg.nocat]) Effect
-- true Categorisation is suppressed
-- false Categorisation is allowed, and the blacklist check is skipped
-- nil Categorisation is allowed
--
-- cfg.categories:
-- Result of yesno(args[cfg.categories]) Effect
-- true Categorisation is allowed, and the blacklist check is skipped
-- false Categorisation is suppressed
-- nil Categorisation is allowed
cfg.nocat = 'nocat'
cfg.categories = 'categories'
-- The parameter name for the legacy "category2" parameter. This skips the blacklist if set to the
-- cfg.category2Yes value, and suppresses categorisation if present but equal to anything other than
-- cfg.category2Yes or cfg.category2Negative.
cfg.category2 = 'category2'
cfg.category2Yes = 'yes'
cfg.category2Negative = '¬'
-- cfg.subpage is the parameter name to specify how to behave on subpages. cfg.subpageNo is the value to
-- specify to not categorise on subpages; cfg.only is the value to specify to only categorise on subpages.
cfg.subpage = 'subpage'
cfg.subpageNo = 'no'
cfg.subpageOnly = 'only'
-- The parameter for data to return in all namespaces.
cfg.all = 'all'
-- The parameter name for data to return if no data is specified for the namespace that is detected. This
-- must be the same as the cfg.other parameter in [[Module:Namespace detect]].
cfg.other = 'other'
-- The parameter name used to specify a page other than the current page; used for testing and
-- demonstration. This must be the same as the cfg.page parameter in [[Module:Namespace detect]].
cfg.page = 'page'
-- The categorisation blacklist. Pages that match Lua patterns in this list will not be categorised.
-- (However, see the explanation of cfg.nocat, cfg.categories and cfg.category2 for some exceptions.)
-- If the namespace name has a space in, it must be written with an underscore, e.g. "Wikipedia_talk".
-- Other parts of the title can have either underscores or spaces.
cfg.blacklist = {
'^Main Page$', -- don't categorise the main page.
-- Don't categorise the following pages or their subpages.
'^Wikipedia:Cascade%-protected items$',
'^Wikipedia:Cascade%-protected items/.*$',
'^User:UBX$', -- The userbox "template" space.
'^User:UBX/.*$',
'^User_talk:UBX$',
'^User_talk:UBX/.*$',
-- Don't categorise subpages of these pages, but allow
-- categorisation of the base page.
'^Wikipedia:Template messages/.+$',
'/[aA]rchive' -- Don't categorise archives.
}
-- This is a table of namespaces to categorise by default. They should be in the format of parameter
-- names accepted by [[Module:Namespace detect]].
cfg.defaultNamespaces = {
'main',
'file',
'help',
'category'
}
----------------------------------------------------------------------------------------------------------
-- End configuration data --
----------------------------------------------------------------------------------------------------------
-- Get dependent modules
local nsDetect = require('Module:Namespace detect')
local yesno = require('Module:Yesno')
local yesno = require('Module:Yesno')

----------------------------------------------------------------------------------------------------------
-- Lazily load things we don't always need
-- Local functions --
local mShared, mappings
-- The following are internal functions, which we do not want to be accessible from other modules. --

----------------------------------------------------------------------------------------------------------
local p = {}

-- Find whether we need to return a category or not.
--------------------------------------------------------------------------------
local function needsCategory(pageObject, args)
-- Helper functions
-- Don't categorise if the relevant options are set.
--------------------------------------------------------------------------------
if yesno(args[cfg.nocat])

or yesno(args[cfg.categories]) == false
local function trimWhitespace(s, removeBlanks)
or (
if type(s) ~= 'string' then
args[cfg.category2]
return s
and args[cfg.category2] ~= cfg.category2Yes
end
and args[cfg.category2] ~= cfg.category2Negative
s = s:match('^%s*(.-)%s*$')
)
if removeBlanks then
if s ~= '' then
then
return s
return false
end
else
-- If there is no pageObject available, then that either means that we are over
return nil
-- the expensive function limit or that the title specified was invalid. Invalid
end
-- titles will probably only be a problem during testing, so we choose the best
else
-- fallback for being over the expensive function limit. The fallback behaviour
return s
-- of the old template was to assume the page was not a subpage, so we will do
end
-- the same here.
end
if args[cfg.subpage] == cfg.subpageNo and pageObject and pageObject.isSubpage then

return false
--------------------------------------------------------------------------------
end
-- CategoryHandler class
if args[cfg.subpage] == cfg.subpageOnly
--------------------------------------------------------------------------------
and (not pageObject or (pageObject and not pageObject.isSubpage))

then
local CategoryHandler = {}
return false
CategoryHandler.__index = CategoryHandler
end

return true
function CategoryHandler.new(data, args)
local obj = setmetatable({ _data = data, _args = args }, CategoryHandler)
-- Set the title object
do
local pagename = obj:parameter('demopage')
local success, titleObj
if pagename then
success, titleObj = pcall(mw.title.new, pagename)
end
if success and titleObj then
obj.title = titleObj
if titleObj == mw.title.getCurrentTitle() then
obj._usesCurrentTitle = true
end
else
obj.title = mw.title.getCurrentTitle()
obj._usesCurrentTitle = true
end
end

-- Set suppression parameter values
for _, key in ipairs{'nocat', 'categories'} do
local value = obj:parameter(key)
value = trimWhitespace(value, true)
obj['_' .. key] = yesno(value)
end
do
local subpage = obj:parameter('subpage')
local category2 = obj:parameter('category2')
if type(subpage) == 'string' then
subpage = mw.ustring.lower(subpage)
end
if type(category2) == 'string' then
subpage = mw.ustring.lower(category2)
end
obj._subpage = trimWhitespace(subpage, true)
obj._category2 = trimWhitespace(category2) -- don't remove blank values
end
return obj
end

function CategoryHandler:parameter(key)
local parameterNames = self._data.parameters[key]
local pntype = type(parameterNames)
if pntype == 'string' or pntype == 'number' then
return self._args[parameterNames]
elseif pntype == 'table' then
for _, name in ipairs(parameterNames) do
local value = self._args[name]
if value ~= nil then
return value
end
end
return nil
else
error(string.format(
'invalid config key "%s"',
tostring(key)
), 2)
end
end

function CategoryHandler:isSuppressedByArguments()
return
-- See if a category suppression argument has been set.
self._nocat == true
or self._categories == false
or (
self._category2
and self._category2 ~= self._data.category2Yes
and self._category2 ~= self._data.category2Negative
)

-- Check whether we are on a subpage, and see if categories are
-- suppressed based on our subpage status.
or self._subpage == self._data.subpageNo and self.title.isSubpage
or self._subpage == self._data.subpageOnly and not self.title.isSubpage
end

function CategoryHandler:shouldSkipBlacklistCheck()
-- Check whether the category suppression arguments indicate we
-- should skip the blacklist check.
return self._nocat == false
or self._categories == true
or self._category2 == self._data.category2Yes
end

function CategoryHandler:matchesBlacklist()
if self._usesCurrentTitle then
return self._data.currentTitleMatchesBlacklist
else
mShared = mShared or require('Module:Category handler/shared')
return mShared.matchesBlacklist(
self.title.prefixedText,
mw.loadData('Module:Category handler/blacklist')
)
end
end

function CategoryHandler:isSuppressed()
-- Find if categories are suppressed by either the arguments or by
-- matching the blacklist.
return self:isSuppressedByArguments()
or not self:shouldSkipBlacklistCheck() and self:matchesBlacklist()
end

function CategoryHandler:getNamespaceParameters()
if self._usesCurrentTitle then
return self._data.currentTitleNamespaceParameters
else
if not mappings then
mShared = mShared or require('Module:Category handler/shared')
mappings = mShared.getParamMappings(true) -- gets mappings with mw.loadData
end
return mShared.getNamespaceParameters(
self.title,
mappings
)
end
end
end

-- Find whether we need to check the blacklist or not.
function CategoryHandler:namespaceParametersExist()
local function needsBlacklistCheck(args)
-- Find whether any namespace parameters have been specified.
if yesno(args[cfg.nocat]) == false
-- We use the order "all" --> namespace params --> "other" as this is what
or yesno(args[cfg.categories]) == true
-- the old template did.
or args[cfg.category2] == cfg.category2Yes
if self:parameter('all') then
then
return true
return false
end
else
if not mappings then
return true
mShared = mShared or require('Module:Category handler/shared')
end
mappings = mShared.getParamMappings(true) -- gets mappings with mw.loadData
end
for ns, params in pairs(mappings) do
for i, param in ipairs(params) do
if self._args[param] then
return true
end
end
end
if self:parameter('other') then
return true
end
return false
end
end

-- Find whether any namespace parameters have been specified.
function CategoryHandler:getCategories()
-- Mappings is the table of parameter mappings taken from
local params = self:getNamespaceParameters()
-- [[Module:Namespace detect]].
local nsCategory
local function nsParamsExist(mappings, args)
for i, param in ipairs(params) do
if args[cfg.all] or args[cfg.other] then
local value = self._args[param]
return true
if value ~= nil then
end
nsCategory = value
for ns, params in pairs(mappings) do
break
for i, param in ipairs(params) do
end
if args[param] then
end
return true
if nsCategory ~= nil or self:namespaceParametersExist() then
end
-- Namespace parameters exist - advanced usage.
end
if nsCategory == nil then
end
nsCategory = self:parameter('other')
return false
end
local ret = {self:parameter('all')}
local numParam = tonumber(nsCategory)
if numParam and numParam >= 1 and math.floor(numParam) == numParam then
-- nsCategory is an integer
ret[#ret + 1] = self._args[numParam]
else
ret[#ret + 1] = nsCategory
end
if #ret < 1 then
return nil
else
return table.concat(ret)
end
elseif self._data.defaultNamespaces[self.title.namespace] then
-- Namespace parameters don't exist, simple usage.
return self._args[1]
end
return nil
end
end

--------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------
-- Global functions --
-- Exports
-- The following functions are global, because we want them to be accessible from #invoke and --
--------------------------------------------------------------------------------
-- from other Lua modules. --

----------------------------------------------------------------------------------------------------------
local p = {}
local p = {}

-- Find if a string matches the blacklist. Returns the match if one is found, or nil otherwise.
function p._exportClasses()
-- Input should be a page title with a namespace prefix, e.g. "Wikipedia talk:Articles for deletion".
-- Used for testing purposes.
function p.matchesBlacklist(page)
return {
if type(page) ~= 'string' then return end
CategoryHandler = CategoryHandler
for i, pattern in ipairs(cfg.blacklist) do
}
local match = mw.ustring.match(page, pattern)
if match then
return match
end
end
end
end

-- The main structure of the module. Checks whether we need to categorise,
function p._main(args, data)
-- and then passes the relevant arguments to [[Module:Namespace detect]].
data = data or mw.loadData('Module:Category handler/data')
function p._main(args)
local handler = CategoryHandler.new(data, args)
-- Get the page object and argument mappings from
if handler:isSuppressed() then
-- [[Module:Namespace detect]], to save us from having to rewrite the
return nil
-- code.
end
local pageObject = nsDetect.getPageObject(args[cfg.page])
return handler:getCategories()
local mappings = nsDetect.getParamMappings()
if not needsCategory(pageObject, args) then return end
local ret = ''
-- Check blacklist if necessary.
if not needsBlacklistCheck(args) or not p.matchesBlacklist(pageObject.prefixedText) then
if not nsParamsExist(mappings, args) then
-- No namespace parameters exist; basic usage. Pass args[1] to
-- [[Module:Namespace detect]] using the default namespace
-- parameters, and return the result.
local ndargs = {}
for _, ndarg in ipairs(cfg.defaultNamespaces) do
ndargs[ndarg] = args[1]
end
ndargs.page = args.page
ndargs.demospace = args.demospace
local ndresult = nsDetect._main(ndargs)
if ndresult then
ret = ret .. ndresult
end
else
-- Namespace parameters exist; advanced usage.
-- If the all parameter is specified, return it.
local all = args.all
if type(all) == 'string' then
ret = ret .. all
end
-- Get the arguments to pass to [[Module:Namespace detect]].
local ndargs = {}
for ns, params in pairs(mappings) do
for _, param in ipairs(params) do
ndargs[param] = args[param] or args[cfg.other] or nil
end
end
ndargs.other = args.other
ndargs.page = args.page
ndargs.demospace = args.demospace
local data = nsDetect._main(ndargs)
-- Work out what to return based on the result of the namespace detect call.
local datanum = tonumber(data)
if type(datanum) == 'number' then
-- "data" is a number, so return that positional parameter.
-- Remove non-positive integer values, as only positive integers
-- from 1-10 were used with the old template.
if datanum > 0 and math.floor(datanum) == datanum then
local dataArg = args[datanum]
if type(dataArg) == 'string' then
ret = ret .. dataArg
end
end
else
-- "data" is not a number, so return it as it is.
if type(data) == 'string' then
ret = ret .. data
end
end
end
end
return ret
end
end

function p.main(frame, data)
function p.main(frame)
-- If called via #invoke, use the args passed into the invoking
data = data or mw.loadData('Module:Category handler/data')
-- template, or the args passed to #invoke if any exist. Otherwise
local args = require('Module:Arguments').getArgs(frame, {
-- assume args are being passed directly in.
wrappers = data.wrappers,
local origArgs
valueFunc = function (k, v)
if frame == mw.getCurrentFrame() then
v = trimWhitespace(v)
origArgs = frame:getParent().args
if type(k) == 'number' then
for k, v in pairs(frame.args) do
if v ~= '' then
origArgs = frame.args
return v
break
else
end
return nil
else
end
origArgs = frame
else
end
return v
end
-- Trim whitespace and remove blank arguments for the following args:
end
-- 1, 2, 3 etc., "nocat", "categories", "subpage", and "page".
})
return p._main(args, data)
local args = {}
for k, v in pairs(origArgs) do
if type(v) == 'string' then
v = mw.text.trim(v) -- Trim whitespace.
end
if type(k) == 'number'
or k == cfg.nocat
or k == cfg.categories
or k == cfg.subpage
or k == cfg.page
then
if v ~= '' then
args[k] = v
end
else
args[k] = v
end
end
-- Lower-case "nocat", "categories", "category2", and "subpage". These
-- parameters are put in lower case whenever they appear in the old
-- template, so we can just do it once here and save ourselves some work.
local lowercase = {cfg.nocat, cfg.categories, cfg.category2, cfg.subpage}
for _, v in ipairs(lowercase) do
local argVal = args[v]
if type(argVal) == 'string' then
args[v] = mw.ustring.lower(argVal)
end
end
return p._main(args)
end
end

return p
return p

Sideversjonen fra 27. mai 2024 kl. 09:25


----------------------------------------------------------------------------------------------------------
--                                                                                                      --
--                                          CATEGORY HANDLER                                            --
--                                                                                                      --
--      This module implements the {{category handler}} template in Lua, with a few improvements: all   --
--      namespaces and all namespace aliases are supported, and namespace names are detected            --
--      automatically for the local wiki. This module requires [[Module:Namespace detect]] and          --
--      [[Module:Yesno]] to be available on the local wiki. It can be configured for different wikis    --
--      by altering the values in the "cfg" table.                                                      --
--                                                                                                      --
----------------------------------------------------------------------------------------------------------
 
----------------------------------------------------------------------------------------------------------
--                                          Configuration data                                          --
--                      Language-specific parameter names and values can be set here.                   --
----------------------------------------------------------------------------------------------------------
 
local cfg = {}
 
-- The following config values set the names of parameters that suppress categorisation. They are used
-- with Module:Yesno, and work as follows:
--
-- cfg.nocat:
-- Result of yesno(args[cfg.nocat])         Effect
-- true                                     Categorisation is suppressed
-- false                                    Categorisation is allowed, and the blacklist check is skipped
-- nil                                      Categorisation is allowed
--
-- cfg.categories:
-- Result of yesno(args[cfg.categories])    Effect
-- true                                     Categorisation is allowed, and the blacklist check is skipped
-- false                                    Categorisation is suppressed
-- nil                                      Categorisation is allowed
cfg.nocat = 'nocat'    
cfg.categories = 'categories'
 
-- The parameter name for the legacy "category2" parameter. This skips the blacklist if set to the
-- cfg.category2Yes value, and suppresses categorisation if present but equal to anything other than
-- cfg.category2Yes or cfg.category2Negative.
cfg.category2 = 'category2'
cfg.category2Yes = 'yes'
cfg.category2Negative = '¬'
 
-- cfg.subpage is the parameter name to specify how to behave on subpages. cfg.subpageNo is the value to
-- specify to not categorise on subpages; cfg.only is the value to specify to only categorise on subpages.
cfg.subpage = 'subpage'
cfg.subpageNo = 'no'
cfg.subpageOnly = 'only'
 
-- The parameter for data to return in all namespaces.
cfg.all = 'all'
 
-- The parameter name for data to return if no data is specified for the namespace that is detected. This
-- must be the same as the cfg.other parameter in [[Module:Namespace detect]].
cfg.other = 'other'
 
-- The parameter name used to specify a page other than the current page; used for testing and
-- demonstration. This must be the same as the cfg.page parameter in [[Module:Namespace detect]].
cfg.page = 'page'
 
-- The categorisation blacklist. Pages that match Lua patterns in this list will not be categorised.
-- (However, see the explanation of cfg.nocat, cfg.categories and cfg.category2 for some exceptions.)
-- If the namespace name has a space in, it must be written with an underscore, e.g. "Wikipedia_talk".
-- Other parts of the title can have either underscores or spaces.
cfg.blacklist = {
    '^Main Page$', -- don't categorise the main page.
 
    -- Don't categorise the following pages or their subpages.
    '^Wikipedia:Cascade%-protected items$',
    '^Wikipedia:Cascade%-protected items/.*$',
    '^User:UBX$', -- The userbox "template" space.
    '^User:UBX/.*$',
    '^User_talk:UBX$',
    '^User_talk:UBX/.*$',
 
    -- Don't categorise subpages of these pages, but allow
    -- categorisation of the base page.
    '^Wikipedia:Template messages/.+$',
 
    '/[aA]rchive' -- Don't categorise archives.
}
 
-- This is a table of namespaces to categorise by default. They should be in the format of parameter
-- names accepted by [[Module:Namespace detect]].
cfg.defaultNamespaces = {
    'main',
    'file',
    'help',
    'category'
}
 
----------------------------------------------------------------------------------------------------------
--                                          End configuration data                                      --
----------------------------------------------------------------------------------------------------------
 
-- Get dependent modules
local nsDetect = require('Module:Namespace detect')
local yesno = require('Module:Yesno')
 
----------------------------------------------------------------------------------------------------------
--                                          Local functions                                             --
--      The following are internal functions, which we do not want to be accessible from other modules. --
----------------------------------------------------------------------------------------------------------
 
-- Find whether we need to return a category or not.
local function needsCategory(pageObject, args)
    -- Don't categorise if the relevant options are set.
    if yesno(args[cfg.nocat])
        or yesno(args[cfg.categories]) == false
        or (
            args[cfg.category2] 
            and args[cfg.category2] ~= cfg.category2Yes 
            and args[cfg.category2] ~= cfg.category2Negative
        )
    then
        return false
    end
    -- If there is no pageObject available, then that either means that we are over
    -- the expensive function limit or that the title specified was invalid. Invalid
    -- titles will probably only be a problem during testing, so we choose the best
    -- fallback for being over the expensive function limit. The fallback behaviour
    -- of the old template was to assume the page was not a subpage, so we will do
    -- the same here.
    if args[cfg.subpage] == cfg.subpageNo and pageObject and pageObject.isSubpage then
        return false
    end
    if args[cfg.subpage] == cfg.subpageOnly 
        and (not pageObject or (pageObject and not pageObject.isSubpage))
    then
        return false
    end
    return true
end
 
-- Find whether we need to check the blacklist or not.
local function needsBlacklistCheck(args)
    if yesno(args[cfg.nocat]) == false
        or yesno(args[cfg.categories]) == true
        or args[cfg.category2] == cfg.category2Yes
    then
        return false
    else
        return true
    end
end
 
-- Find whether any namespace parameters have been specified.
-- Mappings is the table of parameter mappings taken from
-- [[Module:Namespace detect]].
local function nsParamsExist(mappings, args)
    if args[cfg.all] or args[cfg.other] then
        return true
    end
    for ns, params in pairs(mappings) do
        for i, param in ipairs(params) do
            if args[param] then
                return true
            end
        end
    end
    return false
end
 
----------------------------------------------------------------------------------------------------------
--                                          Global functions                                            --
--      The following functions are global, because we want them to be accessible from #invoke and      --
--      from other Lua modules.                                                                         --
----------------------------------------------------------------------------------------------------------
 
local p = {}
 
-- Find if a string matches the blacklist. Returns the match if one is found, or nil otherwise.
-- Input should be a page title with a namespace prefix, e.g. "Wikipedia talk:Articles for deletion".
function p.matchesBlacklist(page)
    if type(page) ~= 'string' then return end
    for i, pattern in ipairs(cfg.blacklist) do
        local match = mw.ustring.match(page, pattern)
        if match then
            return match
        end
    end
end
 
-- The main structure of the module. Checks whether we need to categorise,
-- and then passes the relevant arguments to [[Module:Namespace detect]].
function p._main(args)
    -- Get the page object and argument mappings from
    -- [[Module:Namespace detect]], to save us from having to rewrite the
    -- code.
    local pageObject = nsDetect.getPageObject(args[cfg.page])
    local mappings = nsDetect.getParamMappings()
 
    if not needsCategory(pageObject, args) then return end
 
    local ret = ''
    -- Check blacklist if necessary.
    if not needsBlacklistCheck(args) or not p.matchesBlacklist(pageObject.prefixedText) then
        if not nsParamsExist(mappings, args) then
            -- No namespace parameters exist; basic usage. Pass args[1] to
            -- [[Module:Namespace detect]] using the default namespace
            -- parameters, and return the result.
            local ndargs = {}
            for _, ndarg in ipairs(cfg.defaultNamespaces) do
                ndargs[ndarg] = args[1]
            end
            ndargs.page = args.page
            ndargs.demospace = args.demospace
            local ndresult = nsDetect._main(ndargs)
            if ndresult then
                ret = ret .. ndresult
            end
        else
            -- Namespace parameters exist; advanced usage.
            -- If the all parameter is specified, return it.
            local all = args.all
            if type(all) == 'string' then
                ret = ret .. all
            end
 
            -- Get the arguments to pass to [[Module:Namespace detect]].
            local ndargs = {}
            for ns, params in pairs(mappings) do
                for _, param in ipairs(params) do
                    ndargs[param] = args[param] or args[cfg.other] or nil
                end
            end
            ndargs.other = args.other
            ndargs.page = args.page
            ndargs.demospace = args.demospace
 
            local data = nsDetect._main(ndargs)
 
            -- Work out what to return based on the result of the namespace detect call.
            local datanum = tonumber(data)
            if type(datanum) == 'number' then
                -- "data" is a number, so return that positional parameter.
                -- Remove non-positive integer values, as only positive integers
                -- from 1-10 were used with the old template.
                if datanum > 0 and math.floor(datanum) == datanum then
                    local dataArg = args[datanum]
                    if type(dataArg) == 'string' then
                        ret = ret .. dataArg
                    end
                end
            else
                -- "data" is not a number, so return it as it is.
                if type(data) == 'string' then
                    ret = ret .. data
                end
            end
        end
    end
    return ret
end
 
function p.main(frame)
    -- If called via #invoke, use the args passed into the invoking
    -- template, or the args passed to #invoke if any exist. Otherwise
    -- assume args are being passed directly in.
    local origArgs
    if frame == mw.getCurrentFrame() then
        origArgs = frame:getParent().args
        for k, v in pairs(frame.args) do
            origArgs = frame.args
            break
        end
    else
        origArgs = frame
    end
 
    -- Trim whitespace and remove blank arguments for the following args:
    -- 1, 2, 3 etc., "nocat", "categories", "subpage", and "page".
    local args = {}
    for k, v in pairs(origArgs) do
        if type(v) == 'string' then
            v = mw.text.trim(v) -- Trim whitespace.
        end
        if type(k) == 'number'
            or k == cfg.nocat
            or k == cfg.categories
            or k == cfg.subpage
            or k == cfg.page
        then
            if v ~= '' then
                args[k] = v
            end
        else
            args[k] = v
        end
    end
 
    -- Lower-case "nocat", "categories", "category2", and "subpage". These
    -- parameters are put in lower case whenever they appear in the old
    -- template, so we can just do it once here and save ourselves some work.
    local lowercase = {cfg.nocat, cfg.categories, cfg.category2, cfg.subpage}
    for _, v in ipairs(lowercase) do
        local argVal = args[v]
        if type(argVal) == 'string' then
            args[v] = mw.ustring.lower(argVal)
        end
    end
 
    return p._main(args)
end
 
return p